View ICPL0601_7780219.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 5/12/2012 dc93162 description the icpl0600, ICPL0601 and icpl0611 devices each consist of an infrared emitting diode, optically coupled to a high speed integrated photo detector logic gate with a strobable output. these devices belong to isocom compact range of optocouplers. features ? half pitch 1.27mm ? high speed 10mbit/s ? 10kv/ s min. common mode transient immunity (icpl0611) ? high ac isolation voltage 3750v rms ? guaranteed performance from -40c to 85c ? wide operating temperature range -40c to 100c ? logic gate output ? pb free and rohs compliant ? halogen free ? safety approvals pending applications ? line receivers, data communication ? lsttl to ttl, lsttl or 5v cmos ? data multiplexing ? pulse transformer replacement ? switch mode power supplies ? ground loop elimination ? computer peripheral interface order information ? add t&r after pn for surface mount tape & reel icpl0600 / ICPL0601 / icpl0611 isocom components isocom components 2004 ltd unit 25b, park view road west, park view industrial estate hartlepool, cleveland, ts25 1ud, united kingdom tel: +44 (0)1429 863 609 fax : +44 (0)1429 863 581 e-mail: sales@isocom.co.uk http://www.isocom.com isocom components asia ltd hong kong office, block a, 8/f, wah hing industrial mansion, 36 tai yau street, san po kong, kowloon, hong kong. tel: +852 2995 9217 fax : +852 8161 6292 e-mail: sales@isocom.com.hk absolute maximum ratings (t a = 25c) input diode forward current 20ma reverse voltage 5v power dissipation 40mw output output current 50ma output voltage 7.0v supply voltage 7.0v enable input voltage 5.5v (maximum 500mv above v cc ) enable input current 5ma power dissipation 85mw total package isolation voltage 3750v rms operating temperature -40 to 100 c storage temperature -55 to 125 c lead soldering temperature (10s) 260c 5 6 7 8 1 2 3 4 a 0.1 f bypass capacitor must be connected be- tween pins 8 and 5. 1. no connection 2. anode 3. cathode 4. no connection 5. gnd 6. vout 7. v e 8. v cc
2 5/12/2012 dc93162 truth table (positive logic) electrical characteristics (t a = -40c to 85c unless otherwise specified) input output * typical values at t a = 25c icpl0600 / ICPL0601 / icpl0611 isocom components parameter symbol test condition min typ.* max unit forward voltage v f i f = 10ma 1.4 1.8 v reverse voltage v r i r = 10a 5.0 v temperature coefficient of v f v f / t a i f = 10ma -1.8 mv/c input capacitance c in v f = 0v, f = 1mhz 60 pf parameter symbol test condition min typ.* max unit high level supply current i cch i f = 0ma, v e = 0.5v, v cc = 5.5v 10 ma i f = 10ma, v cc = 5.5v 13 v e = 2.0v, v cc = 5.5v -1.6 low level enable current i el v e = 0.5v, v cc = 5.5v -1.6 ma high level enable voltage v eh i f = 10ma, v cc = 5.5v 2.0 i f = 10ma, v cc = 5.5v 0.8 v low level supply current high level enable current i ccl i eh ma ma v el low level enable voltage v input enable output h h l l h h h l h l l h h nc l l nc h
3 5/12/2012 dc93162 electrical characteristics (t a = -40c to 85c unless otherwise specified) coupled switching characteristics (t a = -40c to 85c, v cc = 5v, i f = 7.5ma unless otherwise specified) * typical values at t a = 25c icpl0600 / ICPL0601 / icpl0611 isocom components parameter symbol test condition min typ.* max unit high level output current i oh v cc = 5.5v, v e = 2.0v, v o = 5.5v, i f = 250 a 100 a low level output voltage v ol v cc = 5.5v, v e = 2.0v, i f = 5ma, i ol = 13ma 0.6 v input threshold current i ft v cc = 5.5v, v e = 2.0v, v o = 0.6v, i ol = 13ma 5 ma parameter symbol test condition min typ.* max unit propagation delay time to output high level t phl c l = 15pf, r l = 350 ? , t a = 25c 35 75 ns propagation delay time to output low level t plh c l = 15pf, r l = 350 ? , t a = 25c 45 75 ns pulse width distortion | t phl -t plh | c l = 15pf, r l = 350 ? 10 35 ns output rise time t r c l = 15pf, r l = 350 ? 30 40 ns output fall time t f c l = 15pf, r l = 350 ? 10 20 ns enable propagation delay time to output high level t elh 30 40 ns enable propagation delay time to output low level t ehl 20 30 ns i f = 7.5ma, v el = 0v, v eh = 3v, c l = 15pf, r l = 350 ?
4 5/12/2012 dc93162 electrical characteristics (t a = -40c to 85c unless otherwise specified) switching characteristics (t a = -40c to 85c, v cc = 5v, i f = 7.5ma unless otherwise specified) * typical values at t a = 25c icpl0600 / ICPL0601 / icpl0611 isocom components parameter symbol test condition min typ.* max unit common mode transient immunity at logic high cm h icpl0600 (fig 14) i f = 0ma, v oh = 2v, r l = 350 ? , v cm = 10vp-p, t a = 25c v/ s ICPL0601 (fig 14) i f = 0ma, v oh = 2v, r l = 350 ? , v cm = 50vp-p, t a = 25c 5000 icpl0611 (fig 14) i f = 0ma, v oh = 2v, r l = 350 ? , v cm = 400vp-p, t a = 25c 10000 icpl0611 (fig 15) i f = 0ma, v oh = 2v, r l = 350 ? , v cm = 400vp-p, t a = 25c 15000 common mode transient immunity at logic low cm l icpl0600 (fig 14) i f = 7.5ma, v ol =0.8v, r l = 350 ? , v cm = 10vp-p, t a = 25c v/ s ICPL0601 (fig 14) i f = 7.5ma, v ol =0.8v, r l = 350 ? , v cm = 50vp-p, t a = 25c 5000 icpl0611 (fig 14) i f = 7.5ma, v ol = 0.8v, r l = 350 ? , v cm = 400vp-p, t a = 25c 10000 icpl0611 (fig 15) i f = 7.5ma, v ol = 0.8v, r l = 350 ? , v cm = 400vp-p, t a = 25c 15000
5 5/12/2012 dc93162 icpl0600 / ICPL0601 / icpl0611 isocom components fig 1 forward current vs forward voltage fig 2 input threshold current vs t a fig 3 low level output current vs t a fig 4 high level output current vs t a fig 5 output voltage vs input forward current fig 6 low level output voltage vs t a
6 5/12/2012 dc93162 icpl0600 / ICPL0601 / icpl0611 isocom components fig 7 propagation delay time vs forward current fig 8 propagation delay time vs t a fig 9 enable propagation delay time vs t a fig 10 pulse width distortion vs t a fig 11 rise time / fall time vs t a
7 5/12/2012 dc93162 icpl0600 / ICPL0601 / icpl0611 isocom components fig 13 t ehl and t elh test circuit fig 12 t phl , t plh , t r and t f test circuit 10% 90% output (vo) output (vo) input i f =7.5ma i f =3.75ma 1.5v t r t f t plh t phl [ [ output (vo) input 3.0v 1.5v 1.5v t elh t ehl
8 5/12/2012 dc93162 icpl0600 / ICPL0601 / icpl0611 isocom components common mode transient immunity in logic high level is the maximum tolerable (positive) dv cm /dt on the leading edge of the common mode pulse signal v cm , to assure that the output will remain in a logic high state (i.e., v o > 2.0v). common mode transient immunity in logic low level is the maximum tolerable (negative) dv cm /dt on the trailing edge of the common mode pulse signal, v cm , to assure that the output will remain in a logic low state (i.e., v o < 0.8v). fig 14 common mode transient immunity test circuit switching pos. b, i f =7.5ma switching pos. a, i f =0ma cm l cm h v o (min) v o (max) peak v cm 0v 5v v o v o 0.5v fig 15 high common mode transient immunity test circuit
9 5/12/2012 dc93162 icpl0600 / ICPL0601 / icpl0611 isocom components notes: - the v cc supply must be bypassed by a 0.1 f capacitor or larger with good high frequency characteristic and should be connected as close as possible to the package v cc and gnd pins. - enable input ? no pull up resistor required as the device has an internal pull up resistor. - t plh is measured from the 3.75ma level on the high to lo w transition of the input current pulse to the 1.5 v level on the low to high transition of the output voltage pulse. - t phl is measured from the 3.75ma level on the low to high transition of the input current pulse to the 1.5 v level on the high to low transition of the output voltage pulse. - t r rise time is measured from the 10% to the 90% leve ls on the low to high transition of the output pulse. - t f fall time is measured from the 90% to the 10% leve ls on the high to low transition of the output pulse. - t elh is measured from the 1.5v level on the high to lo w transition of the input enable voltage pulse to the 1.5v level on the low to high transition of the output voltage pulse. - t ehl is measured from the 1.5v level on the low to high transition of the input enable voltage pulse to the 1.5v level on the high to low tr ansition of the output voltage pulse. - cm h ? the maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state (i.e., v o > 2.0v). - cm l ? the maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the low output state (i.e., v o < 0.8v).
10 5/12/2012 dc93162 order information icpl0600, ICPL0601, icpl0611 after pn description packing quantity none surface mount tube packaging 100 pcs per tube t&r surface mount tape & reel 2000 pcs per reel icpl0600 / ICPL0601 / icpl0611 isocom components
11 5/12/2012 dc93162 package dimensions (mm) recommended solder pad layout (mm) icpl0600 / ICPL0601 / icpl0611 isocom components
12 5/12/2012 dc93162 device marking (example icpl0600) icpl0600 denotes device part number y denotes 1 digit year code ww denotes 2 digit week code i denotes isocom reflow soldering temperature profile icpl0600 / ICPL0601 / icpl0611 isocom components time (s) 150c 1-3 c/s max 60s ? 120s 200c 217c >255 c (30s max) 60s ? 100 s 260 c (peak,10s max) temp (c) ! 1-3 c/s max icpl 0600 i yww
13 5/12/2012 dc93162 tape and reel packaging icpl0600 / ICPL0601 / icpl0611 isocom components ? direction of feed from reel ? dimension no. a0 a1 b0 d0 d1 e f dimension (mm) 6.20.1 4.10.1 5.280.1 1.50.1 1.50.3 1.750.1 5.50.1 dimension no. po p1 p2 t w k0 k1 dimension (mm) 4.00.1 8.00.1 2.00.1 0.40.1 12.0 +0.3/-0.1 3.70.1 0.30.1

▲Up To Search▲

Price & Availability of ICPL0601

	To Download ICPL0601 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .